£18.85
Pack of 10 - New Style Apollo Call Point Test Keys55200 Series Only
£2.05
All detectors in the Discovery and XP95 range fit into the intelligent mounting base. The mounting base is a low insertion force basewith stainless steel contacts for the detector terminals.Xpert...
£2.48
The Intelligent Isolator Base is unique and designed only to accept the Intelligent Isolator.
£8.77
The XP95 I.S. Mounting Base has been designed to accept only IS products. This ensures that standard detectors cannot inadvertently be fitted into an intrinsically safe system. XPERT cards are...
£15.71
The Intelligent Low Power Relay Base incorporates a low power relay to control field equipment such as automatic door closers. Also available with an increased depth which allows for cables...
£30.38
This is for use on intelligent (Apollo XP95 or Discovery) systems. It incorporates a base into which an Apollo detector or beacon can be fitted. It can also be used with...
£48.58
The Sounder Beacon Base is a loop-powered sounder and beacon combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The Sounder...
£30.38
The Beacon Base is a loop-powered beacon combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The beacon base can be...
£38.51
The Intelligent Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery or XP95 system. Features Self-test fault monitoring Choice of tones Group addressing...
£84.83
The DIN-Rail Sounder Controller (5 Amperes) is used to control the operation of a zone of externally powered sounders and report their status to the control panel.
£443.66
The Intelligent Reflective Beam Detector differs from a traditional beam detector in that it is a single unit which houses a transmitter, a receiver and the control electronics. The beam...
£119,998.80
The Intelligent Reflective Beam Detector differs from a traditional beam detector in that it is a single unit which houses a transmitter, a receiver and the control electronics. The beam...
£113.05
The Multi-Tone Weatherproof Open-Area Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system. The sounder comprises a backbox and sounder unit supplied together. Also...
£56.20
The Multi-Tone Open-Area Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system.Also available with White body (55000-279) Features Includes choice of tones:...
£119,998.80
The XP95 flame detector is sensitive to low-frequency, flickering infra-red radiation emitted by flames during combustion. It is designed for use in large areas that require a detector to give...
£79.86
The Multi-Tone Open-Area Sounder Beacon is designed for use in indoor open areas and can be connected to any Discovery or XP95 system. The sounder beacon complements Apollo's intelligent and...
£136.32
The Weatherproof Multi-Tone Open-Area Sounder Beacon is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder beacon complements Apollo's intelligent and integrated...
£28.48
The XP95 heat detector has a low air-flow resistant case for good contact between the sensing thermistor and the surrounding air. Temperature is measured by a single thermistor network which...
£28.80
The XP95 heat detector has a low air-flow resistant case for good contact between the sensing thermistor and the surrounding air. Temperature is measured by a single thermistor network which...
£131.57
The XP95 IS Heat Detector operates by measuring heat levels with a single thermistor network which gives a count output proportional to the external air temperature.
£119,998.80
Ionisation detectors work in the following way.Air in the dual sensing chambers is irradiated to produce ions that travel to the positive and negative electrodes, creating a current flow. As...
£28.70
The XP95 optical detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the LED...
£131.57
The XP95 IS Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.
£15.79
The intelligent isolator is placed at intervals on the loop and ensures that, in case of a short circuit, only the section between the isolators will be affected.When the short-circuit...
£35.34
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with...
£46.12
The DIN-Rail Dual Isolator provides two independent isolators which sense and isolate short circuits on Discovery and XP95 loops and spurs
£119,998.80
The Output Unit provides a voltage free single pole change-over relay output. It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs .
£61.63
The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel.
£33.22
The Loop-Powered Beacon is a local-area beacon designed for indoor use. The beacon has been developed as a supplement to sounders for use in situations where there is a risk...
£34.16
The XP95 multisensor detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value.The sensitivity of the detector is concidered...
£46.12
Operating Principles The Intelligent Input/Output Unit provides supervision of one or more normally open contacts connected to a single pair of cables and a set of changeover relay output contacts....
£28.98
(Replaces 55100-908 & 55200-908) Following the launch of the original Manual Call Point (MCP) in 2013, Apollo Fire Detectors have released a new intelligent MCP range this September to support our...
£591.55
The Apollo Test Set is a portable test unit featuring a touch screen display capable of providing several functions in interrogating and controlling all devices connected to the unit, either...