£5.70
The CCP-E is a Conventional call-point based upon the industry standard KAC world series housing. The unit is operated by pressing the EN54 compliant non-frangible (plastic) element and can be...
£78.28
The CCP-E-IS is a Conventional call-point based upon the industry standard KAC world series housing, which can be used in hazardous areas. The unit is operated by pressing the EN54...
Price on Application
The CCP-E-IS is a conventional call point based upon the industry standard KAC world series housing, and which can be used in hazardous areas. Supports either a Frangible glass...
£6.97
The CCP-E is a Conventional call-point based upon the industry standard KAC world series housing. The unit is operated by pressing the EN54 compliant non-frangible (plastic) element and can be...
£44.33
The CCP-W features a Waterproof Housing to IP67, which means it can be mounted in the most severe environmental conditions without water ingress. Comes complete with backbox The unit can...
£114.13
Installation efficienct, flexibility and full compliance with the latest standards are at the heart of the new CCP-W-IS outdoor call point range. Sealed to IP67 Unique plug and play installation...
£36.90
The DCD-1E-IS is ideal for use where medium ambient temperatures exist, such as drying rooms or where Smoke Detectors are unsuitable because of steam or cooking fumes such as in...
£36.90
The DCD-1E-IS(WHT) is an Intrinsically Safe Conventional Rate of Rise Heat Detector with a 60° fixed temperature element designed for installation in hazardous areas. Twin fire LEDs allow 360 degree...
Price on Application
The DCD-1E-IS/SIL is an Intrinsically Safe Conventional Rate of Rise Heat Detector with a 60° fixed temperature element designed for use in hazardous areas. The unit also features a remote...
£8.61
The DCD-AE3 is ideal for use where medium ambient temperatures exist, such as drying rooms or where Smoke Detectors are unsuitable because of steam or cooking fumes such as in...
£6.89
The DCD-CE3 is ideal for use where medium ambient temperatures exist, such as drying rooms or where Smoke Detectors are unsuitable because the presence of steam or cooking fumes such...
£15.14
The DCD-CE3M is a Marine Approved Rate of Rise Heat Detector with a 90°C fixed temperature element, which uses a thermistor and linearising circuit to provide an accurate linear response...
£34.20
The DFG-60BLKJ is particularly suited to environments, which are exposed to high levels of condensation or are hosed down. The detector has a wide operating margin allowing it to respond...
£8.61
Model DFJ-AE3 is a 60°C Fixed Temperature Heat Detector using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator...
£8.61
The DFJ-CE3 is a 90°C Fixed Temperature Heat Detector using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator...
Sold Out
Model DH-24 is an electromagnetic door retainer which ensures retention of the door by means of a smart metallic keeper plate.It is designed to hold open fire doors and is...
Sold Out
A dummy detector to maintain loop continuity during maintenance and commissioning. Allows the system wiring to be verified whilst building work is still being carried out. The unit also protects...
£3.90
Call point key compatible with HCP-E(SCI) and HCP-W(SCI). Can be used to open the front of the unit to reset after an activation or for maintenance. Comes in packs of...
£1,133.67
Model IFD-E is an IR3 flame detector designed for use where open flaming fires may be expected and responds to the light emitted from flames during combustion.The detector discriminates between...
£1,262.87
Model IFD-E(Exd) is an IR3 flame detector designed for use where open flaming fires may be expected and responds to the light emitted from flames during combustion.The detector discriminates between...
£1,145.07
Model IFD-E(IS) Is an intrinsically safe IR3 flame detector designed for use where open flaming fires may be expected and responds to the light emitted from flames during combustion.The detector...
£76.00
A steel wall mounting bracket specifically designed for the IFD Range of IR³ detectors. Adjustable through horizontal and vertical planes. Robust design Fits all IFD detectors for wall mounting Allows...
£76.00
A steel wall mounting bracket specifically designed for the IFD Range of IR³ detectors. Adjustable through horizontal and vertical planes. Robust design Fits all IFD detectors for wall mounting Allows...
£0.40
Glass call point element, features Hochiki Europe logo. For use with 'break glass' style call points Available in packs of 10
£161.42
This isolated barrier is used for intrinsic safety applications. It transfers DC signals from fire alarms, smoke alarms, and temperature sensors in hazardous areas. It can also be used to...
Price on Application
The MTL5061 is a zone-powered, two-channel interface for use in conventional fire detection systems for protection within hazardous areas. In operation, the triggering of a detector causes corresponding change in...
Sold Out
An outer cover removal tool that releases the Hochiki sensor casing from body of the device, to allow access to the photoelctric components and smoke chamber for maintenance/cleaning purposes. The...
Price on Application
The SDP-2 is a duct probe housing allowing a standard photoelectric smoke detection device, either a conventional detector or an analogue sensor, to be mounted on the outside of an...
£27.00
A mounting bracket especially designed for fixing the SDP-3 Duct Detector Mounting Box to the outside surface of a circular or insulated flat duct. The mounting bracket comes with a sealing...
£149.59
A protective enclosure that can be used to house the SDP-3 Duct Detector Mounting Box, to protect it from dust or impact. Features glanded cable entries and a snap-lock style...
£87.19
The SDP-3 is a Duct Probe housing allowing a range of photoelectric smoke detection devices, either conventional or analogue addressable, to be mounted on the outside of an air duct...
£33.00
This pipe attaches to the SDP-3 unit and is inserted through the whole width of an air duct. Air within the duct is drawn up into the SDP-3 and is...
Price on Application
Model SLR-E-IS is a Photoelectric Smoke Detector designed for use in hazardous areas which also incorporates a remote indicator output and a removable chamber for easy maintenance. Each detector incorporates...
Price on Application
Model SLR-E-IS(WHT) is a Photoelectric Smoke Detector designed for use in hazardous areas which also incorporates a remote indicator output and a removable chamber for easy maintenance. Each detector incorporates...
Price on Application
Model SLR-E-IS is a Photoelectric Smoke Detector designed for use in hazardous areas which also incorporates a remote indicator output and a removable chamber for easy maintenance. Each detector incorporates...
Price on Application
The SLR-E3N is a Photelectric Smoke Detector, which is fully compatible with the majority of existing Conventional systems.The SLR-E3N incorporates Hochiki's unique High Performance photoelectric smoke chamber removing the need...
Price on Application
The SLR-E3M is a Photelectric Smoke Detector, which is fully compatible with the majority of existing Conventional systems.The SLR-E3M incorporates Hochiki's unique High Performance photoelectric smoke chamber removing the need...
£18.98
Model SMB-1 is from a range of IP66 rated, grey (RAL7035) enclosures, designed for use with the Hochiki range of CHQ Modules. The SMB-1 features a selection of metric knock-outs...
£7.62
An alternative lid for the SMB-1 enclosure, moulded in grey ABS - can replace the semi-transparent grey lid supplied as standard. Opaque grey ABS Alternative to standard semi-transparent lid
£36.59
Model SMB-2 is an IP66 rated, grey (RAL7035) enclosure designed for use with the Hochiki range of DIN Modules. The SMB-2 features a selection of metric knock-outs and is supplied...
£17.80
An alternative lid for the SMB-2 enclosure, moulded in grey ABS - can replace the semi-transparent grey lid supplied as standard. Opaque grey ABS Alternative to standard semi-transparent lid
£25.95
Model SMB-3 is from a range of IP66 rated, grey (RAL7035) enclosures, designed for use with the Hochiki range of DIN Modules. The SMB-3 features a selection of metric knock-outs...
£11.50
An alternative lid for the SMB-3 enclosure, moulded in grey ABS - can replace the semi-transparent grey lid supplied as standard. Opaque grey ABS Alternative to standard semi-transparent lid
Sold Out
The SMB-ADAPTOR is a mounting plate designed to be fitted within the SMB-1 module enclosure to facilitate the mounting of the CHQ range of modules and ‘mini’ modules. The CHQ...
Price on Application
Converts flush fitting call points to surface mounted.
Price on Application
Model YBN-R/4IS is a conventional Detector Mounting Base associated with the CDX Range of Instrinsically Safe Detectors and is fully compatible with the majority of existing conventional fire alarm control...
£2.85
Model YBN-R/4IS(WHT) is a Conventional Detector Mounting Base associated with the CDX Range of Intrinsically Safe Detectors and is fully compatible with the majority of existing conventional fire alarm control...
