Apollo Series 65 conventional detectors
SAV Wire conventional fire alarm systems have been designed to work with one pair of wires per zone. This works by using one 2 core cable and connecting them to detection devices such as smoke detectors, heat detectors and including manual call points and sounders. This is very appealing to many consumers as the installation time is cut and cost saved.
Apollo have created their own sav wire sounder base to help them keep a foot In the market. This sells well as apollo are a well established and trusted brand when it comes to fire detection equipment, and sav wire items sell well as they are easier to install and saves cost . If you can’t find what you are looking for here or if you have a specific query, then don’t hesitate to give us a call on +443300563094 or email us on sales@firetradesupplies.com.
£33.76
The Beacon Enclosure is weatherproof and allows Apollo's loop-powered beacon to be used in high moisture environments such as swimming pools and food processing areas where wash-down occurs. The enclosure...
£1.96
The bases have been designed to enable detectors to be plugged in without any need for force and have a "one way only" fit. The standard base contains no electronic...
£7.87
The Series 65 Sav-Wire Base is designed to allow Series 65 detectors to be used in 'Sav-Wire' detection and alarm systems.
£14.24
The Series 65 Standard Relay Base provides one set of volt-free changeover (from C) contacts that change state when the detector signals an alarm.
£14.24
The Series 65 Auxiliary Relay Base provides two sets of volt-free changeover contacts to facilitate the switching of a remote LED or other auxiliary device.
£7.04
The Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a 'latching' position....
£300.08
The Series 65 Mounted UV Flame Detector is designed to protect enclosed indoor areas where open flaming fires may be expected. The detector has a single UV sensor with a narrow...
£10.90
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices. Series 65 detectors have a wide voltage range (9-33 volt DC) and...
£11.54
Apollo Series 65 smoke & heat detector range are a direct replacment for the earlier Series 60 devices. Series 65 detectors have a wide voltage range (9-33 volt DC) and...
£11.54
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices. Series 65 detectors have a wide voltage range (9-33 volt DC) and...
£11.54
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices. Series 65 detectors have a wide voltage range (9-33 volt DC) and...
£19.56
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices.Series 65 detectors have a wide voltage range (9-33 volt DC) and can...
£26.08
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices.Series 65 detectors have a wide voltage range (9-33 volt DC) and can...
£12.88
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices. Series 65 have a wide voltage range (9-33 volt DC) and can...
£11.98
The conventional manual call point has been designed to operate on conventional fire detection systems, the manual call point is available in two versions, indoor and outdoor in either red...
£3.70
KAC Callpoints are the leaders in Call Point manufacture, invented by KAC over 40 years ago they have constantly driven to improve both standards and design of the call point...
£14.64
Menvier new style fire alarm call point test keyPlease view next picture to see call point aperture type
