£2.81
The base is a completely new design with a large open working area and single quadrant terminals. Other features include two fixing centres, a guide on the base interior to indicate...
Price on Application
The Orbis Heater Base has been designed to be used in cold climates where environmental conditions could result in either icing or condensation affecting the operation of detectors. It is...
£11.98
There are six heat detectors in the Orbis range. The detectors are classified according to EN54-5 as rate-of-rise or static and are designated 'R' or 'S' accordingly. Static heat detectors...
£11.64
There are six heat detectors in the Orbis range. The detectors are classified according to EN54-5 as rate-of-rise or static and are designated 'R' or 'S' accordingly. Static heat detectors...
£9.84
There are six heat detectors in the Orbis range. The detectors are classified according to EN54-5 as rate-of-rise or static and are designated 'R' or 'S' accordingly. Static heat detectors...
£12.67
There are six heat detectors in the Orbis range. The detectors are classified according to EN54-5 as rate-of-rise or static and are designated 'R' or 'S' accordingly. Static heat detectors...
£9.84
There are six heat detectors in the Orbis range. The detectors are classified according to EN54-5 as rate-of-rise or static and are designated 'R' or 'S' accordingly. Static heat detectors...
£12.67
There are six heat detectors in the Orbis range. The detectors are classified according to EN54-5 as rate-of-rise or static and are designated 'R' or 'S' accordingly. Static heat detectors...
£53.28
The Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven...
£49.49
The Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven...
£7.03
The Orbis IS Timesaver Base provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.- Grouped Terminals to make wiring easy -Two fixing centres-...
£12.48
The TimeSaver Relay Base incorporates a single-pole voltage-free change-over for switching external equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change...
£8.23
The Sav-Wire Base is designed to allow Orbis detectors to be used in 'Sav-Wire' detection and alarm systems.