£33.76
The Beacon Enclosure is weatherproof and allows Apollo's loop-powered beacon to be used in high moisture environments such as swimming pools and food processing areas where wash-down occurs. The enclosure...
£18.85
Pack of 10 - New Style Apollo Call Point Test Keys55200 Series Only
£1.96
The bases have been designed to enable detectors to be plugged in without any need for force and have a "one way only" fit. The standard base contains no electronic...
£7.87
The Series 65 Sav-Wire Base is designed to allow Series 65 detectors to be used in 'Sav-Wire' detection and alarm systems.
£2.05
All detectors in the Discovery and XP95 range fit into the intelligent mounting base. The mounting base is a low insertion force basewith stainless steel contacts for the detector terminals.Xpert...
£2.48
The Intelligent Isolator Base is unique and designed only to accept the Intelligent Isolator.
£8.77
The XP95 I.S. Mounting Base has been designed to accept only IS products. This ensures that standard detectors cannot inadvertently be fitted into an intrinsically safe system. XPERT cards are...
£15.71
The Intelligent Low Power Relay Base incorporates a low power relay to control field equipment such as automatic door closers. Also available with an increased depth which allows for cables...
£3.00
AlarmSense detectors can only be mounted into the AlarmSense baseThis base is used for installing detectors that do not require an integral sounder or sounder beacon.FeaturesMonitors the presence of detectorWill...
£14.24
The Series 65 Standard Relay Base provides one set of volt-free changeover (from C) contacts that change state when the detector signals an alarm.
£14.24
The Series 65 Auxiliary Relay Base provides two sets of volt-free changeover contacts to facilitate the switching of a remote LED or other auxiliary device.
£30.38
This is for use on intelligent (Apollo XP95 or Discovery) systems. It incorporates a base into which an Apollo detector or beacon can be fitted. It can also be used with...
£48.58
The Sounder Beacon Base is a loop-powered sounder and beacon combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The Sounder...
£30.38
The Beacon Base is a loop-powered beacon combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The beacon base can be...
£7.04
The Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a 'latching' position....
£25.86
The AlarmSense Sounder Beacon Base can only be used with AlarmSense detectors.It can monitor the presence of detectors and signals any unauthorised removal of heads.It is supplied with a high...
£17.82
The AlarmSense Sounder Base can only be used with AlarmSense detectors.It can monitor the presence of detectors and signals any unauthorised removal of heads.It is supplied with a high or...
£38.51
The Intelligent Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery or XP95 system. Features Self-test fault monitoring Choice of tones Group addressing...
£300.08
The Series 65 Mounted UV Flame Detector is designed to protect enclosed indoor areas where open flaming fires may be expected. The detector has a single UV sensor with a narrow...
£10.90
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices. Series 65 detectors have a wide voltage range (9-33 volt DC) and...
£11.54
Apollo Series 65 smoke & heat detector range are a direct replacment for the earlier Series 60 devices. Series 65 detectors have a wide voltage range (9-33 volt DC) and...
£11.54
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices. Series 65 detectors have a wide voltage range (9-33 volt DC) and...
£11.54
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices. Series 65 detectors have a wide voltage range (9-33 volt DC) and...
£84.83
The DIN-Rail Sounder Controller (5 Amperes) is used to control the operation of a zone of externally powered sounders and report their status to the control panel.
£9.74
The heat sensor operates by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions the two...
£10.28
The heat sensor operates by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions the two...
£28.10
The heat sensor operates by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions the two...
£19.56
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices.Series 65 detectors have a wide voltage range (9-33 volt DC) and can...
£26.08
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices.Series 65 detectors have a wide voltage range (9-33 volt DC) and can...
£443.66
The Intelligent Reflective Beam Detector differs from a traditional beam detector in that it is a single unit which houses a transmitter, a receiver and the control electronics. The beam...
£119,998.80
The Intelligent Reflective Beam Detector differs from a traditional beam detector in that it is a single unit which houses a transmitter, a receiver and the control electronics. The beam...
£113.05
The Multi-Tone Weatherproof Open-Area Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system. The sounder comprises a backbox and sounder unit supplied together. Also...
£56.20
The Multi-Tone Open-Area Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system.Also available with White body (55000-279) Features Includes choice of tones:...
£119,998.80
The XP95 flame detector is sensitive to low-frequency, flickering infra-red radiation emitted by flames during combustion. It is designed for use in large areas that require a detector to give...
£79.86
The Multi-Tone Open-Area Sounder Beacon is designed for use in indoor open areas and can be connected to any Discovery or XP95 system. The sounder beacon complements Apollo's intelligent and...
£136.32
The Weatherproof Multi-Tone Open-Area Sounder Beacon is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder beacon complements Apollo's intelligent and integrated...
£12.88
Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices. Series 65 have a wide voltage range (9-33 volt DC) and can...
£11.63
The optical smoke detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the LED...
£12.40
The integrating optical smoke detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the...
£28.82
The AlarmSense optical smoke detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the...
£37.20
The AlarmSense optical smoke detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the...
£28.48
The XP95 heat detector has a low air-flow resistant case for good contact between the sensing thermistor and the surrounding air. Temperature is measured by a single thermistor network which...
£28.80
The XP95 heat detector has a low air-flow resistant case for good contact between the sensing thermistor and the surrounding air. Temperature is measured by a single thermistor network which...
£131.57
The XP95 IS Heat Detector operates by measuring heat levels with a single thermistor network which gives a count output proportional to the external air temperature.
£119,998.80
Ionisation detectors work in the following way.Air in the dual sensing chambers is irradiated to produce ions that travel to the positive and negative electrodes, creating a current flow. As...
£28.70
The XP95 optical detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the LED...
£131.57
The XP95 IS Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.
Apollo Series 65
