The TWINFLEXpro two wire (Twinwire) fire alarm system incorporates the innovative Multipoint ASD combined smoke and heat detectors. This allows for an amazingly simple installation using only one pair of wires per zone. Using the TWINFLEX range of two wire devices means that the installer can utilise the same pair of cables for not only the detection but also the sounders and beacons without extra installation of cables for a sounder circuit. The TWINFLEX Multipoint ASD also offers an amazing 7 different modes of activation this means that when designing and installing the system only one type of device is required which is then set up to the individual circumstance at the time of installation. The 7 different modes that can be achieved are 3 different smoke modes, 2 fixed temp, an ROR (Rate of Rise) and a combination mode which takes into account both smoke and heat.
The Multipoint ASD is available to order with or without a built in sounder (90dBA) which means that no extra sounders are required when an audible warning is required. If extra sounders are required or if a visual alert is required separate sounders and beacons are available. Fire trade supplies offer the full range of FIKE TWINFLEX devices including the FIKE ASD Multipoint detectors, Manual Call points & sounders / beacons. If you cannot find what you are looking for or if you require more assistance, please do not hesitate to contact us on +443300563094 or email us on email@example.com