Apollo Alarmsense two wire detectors
AlarmSense by Apollo is a range of conventional fire detection and alarm products which have been specially designed and manufactured to be connected to the same pair of supply wires in a detection and alarm zone. The apollo alarm sense range includes detectors, a manual call point, a sounder, a beacon, a sounder beacon and a relay module. Some part numbers include 55400-894, 55000-390, 55000-392, 45681-244. . If you can’t find what you are looking for here or if you have a specific query, then don’t hesitate to give us a call on +443300563094 or email us on sales@firetradesupplies.com.
£3.00
AlarmSense detectors can only be mounted into the AlarmSense baseThis base is used for installing detectors that do not require an integral sounder or sounder beacon.FeaturesMonitors the presence of detectorWill...
£25.86
The AlarmSense Sounder Beacon Base can only be used with AlarmSense detectors.It can monitor the presence of detectors and signals any unauthorised removal of heads.It is supplied with a high...
£17.82
The AlarmSense Sounder Base can only be used with AlarmSense detectors.It can monitor the presence of detectors and signals any unauthorised removal of heads.It is supplied with a high or...
£9.74
The heat sensor operates by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions the two...
£10.28
The heat sensor operates by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions the two...
£28.10
The heat sensor operates by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions the two...
£11.63
The optical smoke detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the LED...
£12.40
The integrating optical smoke detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the...
£28.82
The AlarmSense optical smoke detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the...
£37.20
The AlarmSense optical smoke detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the...
£23.95
The AlarmSense Alarm Relay enables devices such as beacons, pillow/bed alarmsand radio vibrating or paging devices to be connected to the fire detection system.This allows the system to comply with...
