The MX-4020 utilises the same graphical LCD user interface that can be found on the MX-4000 series panels
and is based upon the same flash based, microprocessor technology.
All MX-4000 series panels and remote terminals can communicate over the same 2-core network cable.
The display information is fully programmable by individual zone or sector
and can display any combination of fires, faults, pre-alarms or plant alarms.
E.g. can display all information in its own sector, but only shows fire signals from other sectors of a building.
Incorporates "Buzzer Mute", view, enable/disable and test facilities
with dedicated system navigation keys for simple user control.
The RCT has additional sector based control keys for Evacuate, Silence, Resound and Reset,
which allows other networked panels to selectively repond to controls as programmed.
E.g. on a site with multiple buildings, a user may be allowed to silence and reset fires originating in their own building.
Fires originating from other buildings are displayed but cannot be reset.
Fully on-site programmable via an on-board alphanumeric keypad or PC configuration tools.
By using "flash memory" and an advanced graphical display the MX-4010 can be easily configured
to operate in virtually any language, with any character set
and allows for the installer's logo and company details to be displayed on the LCD display during normal operation.
Dimensions(mm): 218H x 300W x 44D
Enclosure: Stell IP30
Cable Entry 20mm Knock-outs - 4 Top & 4 Rear