CHQ-SOM Single Output Module

 

Hochiki

CHQ-SOM

The CHQ-SOM has been designed to allow a single relay output to be connected to the ESP loop. The unit incorporates a volt-free relay contact that can be configured as either N/O or N/C, the relay contact is rated to 30 VDC (max), 1 A (resistive load). The CHQ-SOM features three colour-coded flying leads, the unit also features a wiring terminal block for loop connection. NOTE: To maintain LPCB approval the device must be mounted in an SMB-1 enclosure (or an equivalent enclosure made from polycarbonate or a similar material which is impact resistant as per EN54-18:2005 Clause 5.9) in conjunction with the SMB-ADAPTOR plate, using two M3 screws or two M3 nuts and bolts.

  • Includes a single monitored output
  • Small design for simple provision of a monitored output onto an ESP loop
  • Flying leads for easy installation
  • Addressed with TCH-B200 Hand Held Programmer
  • Approved by LPCB


  • Free Delivery UK Delievery Exceptional help & advice
    Sign Up for our Newsletter

    Subscribe to our newsletter and always be the first to hear about what is happening.


    • Advanced
    • Apollo
    • C-tec
    • Eaton
    • Fike
    • Fireclass
    • Gent by Honeywell
    • Haes
    • Hochiki
    • KAC
    • Kentec
    • Kidde
    • Klaxon
    • Morley
    • NVC
    • Aico
    • Vox Ignis
    • Testifire
    • Solo
    • Ziton
    • Vimpex
    • System Sensor