£583.12
Designed to match the ZP3 main control panel, the ZP3-RDU remote display is an attractive, low profile unit providing repeat indication and system controlat a location remote from the main...
£937.01
Integral modem on ZP3-ACC-MP mounting chassis
£175.82
The ZP3AB-SCB-R provides a remote interface on the system control bus wiring enabling repeat indication and system control, at locations remote from the main panel position. The interface can be...
£166.61
Connects up to 32 remote control units The Ziton ZP3AB-SCB serial control bus driver, is attached directly onto the Ziton ZP3 main control board inside the panel enclosure. It provides the...
£166.61
The ZP3AB-NET1 enables ZP3 control panels to be connected together to form networks. The interface card is attached directly onto the ZP3 main control board inside the panel enclosure. Up...
£166.61
The ZP3AB-RS232 is a serial communications interface which can be attached directly onto the ZP3 main control board, inside the panel enclosure. The board is used to connect the fire...
£249.91
Ziton ZP3AB-MA8 Eight Way Programmable Sounder Driver Board The ZP3AB-MA8 is one of a series of additional, auxiliary boards designed to extend the ZP3 panel standard range of input/output facilities....
£208.26
Ziton ZP3AB-MA8 Eight Way Programmable Sounder Driver Board The ZP3AB-MA8 is one of a series of additional, auxiliary boards designed to extend the ZP3 panel standard range of input/output facilities....
£166.61
The ZP3AB-MIP8 is one of a series of additional, auxiliary boards, designed to extend the ZP3 panel standard range of input/output facilities. Boards are modular in design, and are mounted...
£49.99
RS232 port and commissioning keyswitch board for the ZP3 range of fire panels
£249.91
The ZP3-DB1 is a replacement Display board for a the range of ZP3 panels
£324.88
The ZP3-CPU1 is a replacement CPU for a the range of ZP3 panels
£466.43
The ZP3-PR1 is a 24 character dot matrix printer which can be fitted to the front door of the ZP3 control panel. The kit comprises a printer module, printed circuit...
£208.26
The ZP3AB-OP24 is one of a series of additional, auxiliary boards designed to extend the ZP3 panel standard range of input/output facilities. Boards are modular in design, and are mounted...
£271.56
Cabinet for additional ZP3 accessory boards
£989.38
Features Included:- - Ease of Operation- Automatic Contamination Adjustment- Service and Near Service List for Devices- Sophisticated Alarm Verification- Advanced Loop Isolation- Automatic Self Test- Day/Night Control- Sounder Self Test-...
£1,564.16
Features Included:- - Ease of Operation- Automatic Contamination Adjustment- Service and Near Service List for Devices- Sophisticated Alarm Verification- Advanced Loop Isolation- Automatic Self Test- Day/Night Control- Sounder Self Test-...
£510.17
Designed to match the ZP3 main control panel, the ZP3-RDU remote display is an attractive, low profile unit providing repeat indication and system controlat a location remote from the main...
£83.30
Flushing collar for ZP3 panel
£56.65
Auxiliary chassis plate for MA8 / RL8 / MIP8 / OP24 / NLM (3 max)
£624.77
The ZP3-MB2C-230V-1L is the motherboard to replace a faulty item on an existing ZP3 panel.
£749.72
The ZP3-MB2C-230V-2L is a replacement motherboard for a 2 loop ZP3 panel
£874.68
The ZP3-MB2C-230V-4L is a replacement motherboard for a 4 loop ZP3 panel
£23.39
The A45E-2 addressable interface (input unit) and is designed for installation within the enclosures of equipment associated with fire detection systems. The unit is installed directly onto the ZP loop...
£34.70
The A50E-2 is an addressable relay providing single pole, volt free, change-over contacts. The unit is intended for installation within the equipment to be switched, thereby offering savings in installation...
£52.40
The A51E is an addressable relay providing double pole, volt free, change-over contacts, rated to switch local mains supplies. The unit is intended for installation within the equipment to be...
£27.07
The A60E-2 line isolator provides short circuit protection for addressable loop wiring. Isolators are connected at intervals along the length of the loop, dividing the wiring into a series of...
£24.17
9pin to 9pin Female to Female lead for connecting PC to ZP3 panel
£33.32
ZP3 Configuration Software c/w manual on CD
£382.46
The ZP2 series fire detection and alarm system makes the speed and functionality normally associated with high-end intelligent processing available to all applications small or large. 3rd party accreditation by...
£546.36
The ZP2 series fire detection and alarm system makes the speed and functionality normally associated with high-end intelligent processing available to all applications small or large. 3rd party accreditation by...
£813.72
The ZP2 series fire detection and alarm system makes the speed and functionality normally associated with high-end intelligent processing available to all applications small or large. 3rd party accreditation by...
£546.36
The ZP2 series fire detection and alarm system makes the speed and functionality normally associated with high-end intelligent processing available to all applications small or large. 3rd party accreditation by...
£5.00
Pack contains 4 x keys1 x TOK0071x First Lock 0191 x Jin Tay Tumbler Key 1021 x Plastic TOK Enable Key
£586.07
The ZP3-MON1000 is a diagnostics tool used with the ZP3 range of panels.
£166.61
The ZP3AB-NLM network loop module enables individual ZP3 control panels to be connected in a peer to peer, secure loop network. If there is an open or short circuit present...
£2.29
The ZP7-SB1-P is a standard, POLAR WHITE mounting base allowing any ZP700/ZX800 series addressable detector to be removed or replaced without disconnecting loop wiring from detector terminals. The detectors plug...
£21.20
The ZP720-3P addressable thermal detector is a POLAR WHITE, thermistor controlled device that responds to changes in its ambient temperature. The device provides a reliable response to fires in areas where...
Price on Application
Designed for early response to slow burning, smoldering fires, the ZP730-2P is a POLAR WHITE, addressable smoke detector developed to provide reliable sensing for most fire alarm applications. The detector's proven...
Price on Application
Designed to provide the earliest response to a wide range of fire types, the ZP732-2P POLAR WHITE dual detector combines optical smoke sensing and thermal monitoring to provide an accurate...
£27.28
The ZP755B-2P POLAR WHITE base sounder combines a detector base and audible sounder in a single stylish moulding. The unit provides an elegant solution for areas where the installation of...
£28.87
The ZP785-3 is an addressable call point of stylish design, providing a manual means of initiating a fire alarm on ZP2 & ZP3 addressable systems.Complying with EN 54 Part 11,...
£31.86
The ZX832-3P is a POLAR WHITE, addressable optical/heat multi criteria detector for Ziton addressable fire alarm systems. The ZX832 multisensor represents the next generation of fire detectors giving an earlier warning...
